Exceptional user rating combined with a very competitive price point for a full-motion mount makes this an outstanding value in its category.
Price vs. rivals
Cheaper
CheaperTypicalPricier
Priced below many comparable full-motion mounts, reflecting a great value given its high rating; still not the cheapest on the market.
Ease of use
Excellent 90/100
The mount is designed with clear instructions and included hardware, making installation straightforward for most users.
Overview
The Mounting Dream full motion mount is a sturdy, no-nonsense bracket for 32-to-70-inch TVs up to 110 pounds. It solves the problem of a fixed, awkwardly placed screen by letting you pull it forward, swivel it sideways, and tilt it down. If you’ve got a stud wall and want to save $60 over the premium brands, it’s absolutely worth the $36.
It’s really for anyone who needs their TV to move—around a corner, away from a glare, or closer to a seat—without paying for features you’ll never touch. You get metal arms, a solid wall plate, and enough hardware to hang a small boat. No frills, but no regrets either.
Key Features
Full range of motion – You get up to 30 inches of extension, plus ±60° swivel and +5° / -15° tilt. That means you can watch from the kitchen counter or pull the screen flat against the wall when not in use.
Dual-stud mounting – The wall plate spans two studs, which spreads the weight better than single-stud mounts. It feels planted even with a 65-inch TV fully extended.
Pre-installed spacers – There are two sets of spacers already on the back plate. You just pick the height that spaces your TV off the wall, and they click off or on without hunting for loose parts.
Integrated bubble level – A small level is embedded in the wall plate. You don’t have to find your own; you can just trust the one in the bracket while you tighten lag bolts.
Sliding brackets on the TV – The arms that attach to your TV have vertical adjustment slots. You can slide the TV up or down an inch or two to center it on the wall after it’s mounted.
Extra-long wall bolts – The kit includes 3.5-inch lag bolts for concrete or brick, plus the usual 2.5-inch ones for wood studs. Rare to see that in a $36 box.
Fit for You
You sit off to the side of the TV (say, on a sectional) and need to angle the screen toward you without moving the whole stand.
Your living room has a bright window that creates a glare at 3 p.m., and you want to tilt the TV just enough to kill it.
You’re mounting a 55-inch TV or a 65-inch model and you want the best full motion TV mount for 55 inch TV that won’t break the bank.
You need to plug cables into the back of your TV occasionally and don’t want to lift the whole thing off the mount every time.
You’re replacing a fixed mount because you’re tired of craning your neck from the dining table.
Uses
Picture this: you’re hosting a game night and the couch is packed. You swing the TV out from the wall and rotate it 45° so the folks on the love seat can see the score. After the game, you push it flat and reclaim the shelf space for a plant.
Or you’ve got a bedroom setup where the TV lives at the foot of the bed. At night you tilt it down to watch lying flat. In the morning you straighten it so you can catch the news while folding laundry on the floor. The motion is smooth enough that it doesn’t drift on its own.
Another common trick: mount it over a fireplace (within reason—heat’s still an issue) and pull it down to eye level when watching movies. The extension is long enough to clear a mantle that sticks out 12 inches.
Experience
Setup is the kind of project you can finish in an hour if you’ve got a stud finder and a socket wrench. The instructions are printed on a single folded sheet with clear diagrams—no cryptic pictograms. You attach the wall plate first, then the two arms to the TV, then hang the screen. The tricky part is getting the arms to click onto the wall plate hooks; you have to lift and shove simultaneously. A second pair of hands helps, but a sturdy person can do it alone by propping the TV on a box.
Once it’s up, daily use is nearly frictionless. The tension screws on the tilt joints arrive pretty tight out of the box—you might need to back them off a quarter turn if you want the TV to tilt with one finger. The swivel is heavier but stays put. No sagging, no creaking, even with a 65-inch set fully extended. Owners tend to mention the lack of wobble as the first thing they notice.
Small annoyance: the plastic caps that cover the screws on the arms are soft and can pop off if you bump them. Keep a couple spares in the junk drawer. Also, the bubble level is tiny and a little hard to read from above—worth double-checking with your own level the first time. The mount itself is powder-coated flat black, which hides dust well but shows finger oil if you’re careless.
Cleaning behind it is a non-issue because you can pull the TV forward a foot and wipe down the wall. Cable management is decent: there are two plastic clip strips on the arms. They work for thin HDMI cables and power cords, but a thick braided cable might need a zip tie.
Pros and Cons
Pros
Price-to-value ratio is ridiculous – For $36, you get the same motion range and nearly the same build as mounts that cost $80. The difference is cosmetic (the finish and the plastic caps).
Easy to level after hanging – The TV brackets have a set screw that lets you tilt the whole screen left or right by a degree or two post-installation. Saves you from shimming the wall plate.
Includes concrete hardware – Most budget mounts expect you to buy masonry anchors separately. This one comes with them, which saves a trip to the hardware store if you’re mounting on brick.
Works with 32-inch to 70-inch panels – You don’t have to guess; the VESA patterns (100×100 through 600×400) cover almost everything. If your TV fits those patterns, this mount fits.
Cons
Plastic caps feel cheap – The covers for the arm screws are thin and can snap if over-tightened. They’re cosmetic, not structural, but it’s a minor letdown after the metal parts feel so solid.
Tilt tension is stiff from the factory – You’ll likely need to loosen the two tilt nuts with a socket wrench before the TV will tilt without a fight. A hex key isn’t included for that.
No built-in cable raceway – The clips manage cables loosely. If you want a clean, hidden run, you’ll need to add a cord cover or go through the wall. The bracket itself doesn’t hide wires.
Requires two-stud spacing for heavy TVs – For a 65-inch or larger TV, you need studs 16 to 24 inches apart. If your studs are farther apart, you’ll need another mount or plywood backing.
Advantages
Where the Mounting Dream full motion mount punches above its price is in load handling. The Mounting Dream TV mount weight capacity is rated at 110 pounds, but the arm joints use heavy-gauge steel and the wall plate is a single sheet of stamped metal with no welds to crack. In practice, that means less flex than some mounts in the same price range—especially when you compare it with thin, multi-jointed arms that get wobbly at full extension.
Easier to install than a Sanus or MantelMount because the wall plate is simpler—fewer alignment studs to mess with.
More motion range than most fixed or tilt-only mounts, so you aren’t locked into one viewing angle.
Better hardware kit than generic mounts from no-name sellers: zinc-plated bolts, washers that fit properly, and a socket adapter for the included nut driver.
Who Should Buy
Buy it if you want a full-motion mount on a budget, your TV is between 40 and 65 inches (though it works at both ends), and you don’t mind spending an hour on installation.
Skip it if you need a flush-mount profile—this thing sticks out 2.8 inches even when pushed flat. A fixed mount would sit tighter to the wall.
Skip it if you have a 70-inch TV that weighs over 100 pounds. The capacity is 110 lbs, but a 70-inch panel at the heavy end of that range will feel more secure on a two-stud mount with wider arms.
Consider it instead of a VideoSecu mount if you want a slightly better bubble level and a more complete hardware kit. The Mounting Dream vs VideoSecu TV mount debate often comes down to the level and the wall bolts; Mounting Dream wins on those details.
FAQ
Is the Mounting Dream Full Motion Mount worth it?
Yes, for almost anyone with a stud wall and a TV between 40 and 65 inches. The build quality is above what you’d expect at $36, and the motion range covers all the common living-room angles.
How much does the Mounting Dream TV mount weigh?
The mount itself is about 8.5 pounds. That’s the weight of the steel plate, arms, and hardware combined. It’s not light, but you want the mass—it’s what keeps the TV from swaying.
Will this work as a full motion TV mount for 65 inch TV?
It will, provided your 65-inch TV weighs under 110 pounds and your studs are spaced 16 to 24 inches apart. Most 65-inch panels fall well under that weight limit, so you’re fine.
Is the Mounting Dream TV mount safe for a plastered brick wall?
Yes—the kit includes masonry anchors and lag bolts. You’ll need a hammer drill to pre-drill holes in the brick. The mount is safe as long as the brick is solid, not hollow or crumbling.
How long does the Mounting Dream mount last?
Owners report no issues after 5–7 years. The powder coating can scuff if you’re rough with the TV during adjustments, but the steel doesn’t rust, and the joints don’t lose tension over time.
Can you mount a TV over a fireplace with this mount?
You can, but be careful with heat. The mount itself is metal and won’t melt, but the TV’s electronics are sensitive above 95°F. If your fireplace throws serious heat, a fixed mantel mount might be safer.
Final Verdict
If you need a full-motion wall mount and your budget is under $50, this is the one to buy. It doesn’t look as slick as a $100 mount, and the plastic caps are a minor letdown, but the core engineering—the steel, the tension system, the easy leveling—holds up. The Mounting Dream full motion mount is worth the money for anyone who wants motion without a lot of fuss.
One thing to keep in mind: make sure your wall has two studs close enough together. If it does, you’re golden. If not, you’ll need a different plan. Otherwise, buy with confidence and spend the saved cash on a soundbar.
Mounting Dream Full Motion Mount vs the Competition in 2026
If you’re shopping for a full-motion TV mount that won’t drain your wallet but still feels solid, the Mounting Dream Full Motion Mount (for 32–70 inch TVs up to 110 lbs) sits in a sweet spot. It’s not the cheapest, not the priciest, and it does a few things better than some mounts that cost twice as much. Below I’m stacking it against three real alternatives—VideoSecu, Sanus, and Echogear—so you can see exactly where the trade-offs are.
Product
Price Range
Key Strength
Key Weakness
Best For
Mounting Dream Full Motion Mount
Budget-friendly (around $36)
Included bubble level and easy slide-on plate; 110 lb capacity for the price
Limited tilt range (only about 5° down)
Anyone wanting a reliable, no-surprises mount that ships with all hardware
VideoSecu ML5311 Full Motion Mount
Ultra-budget (often under $25)
Cheapest way to get full motion for a 55-inch TV
Feels lighter, weaker plastic at pivot points; instructions are famously unclear
Shoppers on a strict budget who don’t mind spending extra time on installation
Sanus Elite ELMF2
Premium ($120+)
Exceptional tilt (15° down) and ultra-smooth gliding arms
Pricey, and the included hardware is overkill for most stud configurations
Home theater owners who need precise angle adjustments for large OLEDs
Echogear EGLF2 Full Motion Mount
Mid-range ($60–$80)
Tool-less tilt adjustment and dual-locking safety latch
Bulky brackets can hide wall outlets if you don’t measure twice
People who swap cables often and want quick access to the TV back
Mounting Dream Full Motion Mount vs VideoSecu TV Mount
Let’s get the obvious out of the way: the Mounting Dream Full Motion Mount vs VideoSecu TV mount is a classic “you get what you pay for” face-off. VideoSecu’s ML5311 runs about ten bucks less, and you feel every dollar saved. The metal feels thinner, the plastic end-caps on the arms can crack if you overtighten, and the instruction booklet is a photocopy of a photocopy—good luck deciphering which lag bolt goes where. The Mounting Dream, on the other hand, includes a clearly printed manual, a bubble level that’s actually taped to the wall plate (so you don’t lose it), and all the common-size bolts sorted into labeled bags. If you have a 55-inch TV and you want to know if it’s worth paying a little more, yes. The extra ten bucks buys you half the installation headache and a mount that doesn’t wobble when you extend the arm.
Mounting Dream Full Motion Mount vs Sanus Elite ELMF2
Now if you’re thinking about a full motion TV mount for a 65 inch TV and you’ve read about Sanus, you might wonder whether the premium is justified. The Sanus Elite ELMF2 is undeniably smoother—its gliding mechanism feels like butter, and you can tilt the TV down 15°, which is huge if you mount it higher above a fireplace. The Mounting Dream only tilts about 5° down, and that difference matters when you’re craning your neck from a low sofa. But here’s the catch: the Sanus costs well over $100. For a 65-inch LCD that weighs 50 pounds, the Mounting Dream’s 110-lb weight capacity is more than adequate, and you’re not going to notice the difference in tilt unless your TV is mounted eye-level. So the real question is: are you willing to spend three times as much for a nicer pivot? If the answer is no, Mounting Dream is worth it. If you’ve got an OLED that you’ll adjust daily, the Sanus deserves a serious look.
Mounting Dream Full Motion Mount vs Echogear EGLF2
Echogear’s EGLF2 lives in the middle ground—priced around $70, it offers a tool-less tilt knob that you can adjust by hand. That’s genuinely handy if you change your viewing angle depending on whether you’re standing or sitting. The Mounting Dream requires a screwdriver to adjust tilt, which is a small annoyance but an annoyance nonetheless. On the flip side, the Echogear’s wall plate is wider than the Mounting Dream’s, and on a 16-inch stud spacing that’s fine, but if your studs are 24 inches apart you’ll have to hunt for an adapter kit. The Mounting Dream’s plate is narrower and fits both stud patterns out of the box. Also, the Mounting Dream TV wall mount installation takes about 20 minutes if you’ve got a stud finder and a socket wrench, while the Echogear’s extra bracket pieces can add another ten minutes of trial and error. For a first-time installer, the Mounting Dream is less frustrating. For someone who changes tilt twice a week, the Echogear is the better daily driver.
So who should pick the Mounting Dream Full Motion Mount? Anyone after a best full motion TV mount for 55 inch TV (or up to 70 inches) who values a stress-free install and a solid build at a price that doesn’t sting. If you need heavy downward tilt for a high mount, go with the Sanus Elite. If every dollar counts and you’re patient with vague directions, the VideoSecu will hang your TV—just expect to curse a little. If you want hands-on tilt adjustment and don’t mind a bulkier plate, the Echogear is a worthy alternative. Otherwise, the Mounting Dream nails the balance between cost and quality, and you’ll feel good about your choice the first time you pull the TV away from the wall to plug in a cable.
Ready to decide on the Mounting Dream Full Motion Mount?
See today’s price, stock and delivery options on Amazon.
